UNIT VIII Course Project
Conduct an audit of the following safety management system elements at your organization or an organization with which you are familiar and have access to the required information:
SAFETY MANAGEMENT SYSTEM ELEMENTS
ANSI/AIHA Z10 SECTIONS
COURSE TEXTBOOK CHAPTERS
1. Occupational Health and Safety Management System
2. Occupational Health and Safety Policy
3. Responsibility and Authority
4. Employee Participation
5. Review Process, Assessment, and Prioritization
6. Risk Assessment
7. Hierarchy of Controls
8. Design Review
9. Management of Change
11. Monitoring and Measurement
12. Incident Investigation
14. Corrective and Preventive Actions
15. Feedback to the Planning Process
16. Management Review
Below, you will find some suggested sources for the objective evidence to support your evaluation:
Documents: Organizational safety manuals and instructions, safe operating procedures, and job hazard analyses
Records: E-mails or letters from management to employees, safety meeting minutes, mishap logs, audit reports, Occupational Safety and Health Administration (OSHA) citations, inspection reports, risk assessments, and training records
Interviews: Management personnel, supervisors, and employees
Observation: Walk through some workplaces to observe conditions for yourself.
For each management system element, discuss the objective evidence you found or were unable to find. Evaluate the effectiveness of the organization’s implementation of each element against available reference sources and best practice information. Use the following four-tier evaluation scheme to rate each element:
World Class: OHS performance
Strong: Conforming/complete, may have minor gaps with action plans
Moderate: Scattered non-conformances need to be addressed, positive trends/major elements in place
Limited: Multiple or significant systemic non-conformances exist.
Appropriate references include the course textbook; textbooks from other college-level courses; ANSI/AIHA Z10-2012; other published consensus standards like ANSI, ASSE, AIHA, ISO, and NFPA; OSHA standards and voluntary guidelines; and articles published in professional journals. Blogs, Wikipedia, About.com, Ask.com, and other unmonitored Internet resources are not considered scholarly references and should not be used. Please contact your professor if you have any questions about the appropriateness of a source.
If an element is found to be less than World Class, provide recommendations for improvement. Be sure to use appropriate scholarly sources to support your recommendations.
Provide a summary of the overall status of the organization’s safety management system, and comment on the degree of alignment between the safety management system and other management system efforts utilized at the facility.
The Unit VIII Course Project must be a minimum of seven pages and a maximum of 10 pages in length, not including the title and reference pages. A minimum of five professional sources must be used.